• To avoid BSoD errors, it is important that you download and install Windows Updates Certain hardware or software may have problems with Windows 10, and since hardware and software issues can create such errors, it is extremely important that you update Windows 10 as often as you can.
  • For a stable and error free BSoD system, be sure to update your drivers frequently. To update a certain driver, you just need to visit the website of your hardware manufacturer and download the latest drivers for your device.
  • BSoD errors are usually a sign of hardware problems. Go to our BSoD Troubleshooting section and solve your problem.
  • the Windows 10 mistakes Hub It is the perfect place to start if you have that problem.

Blue screen of death errors can be caused by faulty hardware or incompatible software, and it is sometimes difficult to determine the exact problem.


Since these errors will be blocked Windows 10 and restart your computer frequently, it is important that you repair them, therefore today we will show you how to fix the FAILED INITIALIZATION SETUP error.


  1. To update Windows 10
  2. Update your drivers
  3. Run the BSOD troubleshooter
  4. Run the SFC scan
  5. Run DISM
  6. Check the hard drive
  7. Turn off caching on your motherboard
  8. Update the firmware of your SSD
  9. Check for problematic software
  10. Check for problematic hardware


Solution 1 – Update Windows 10

To avoid BSoD errors, it is crucial that you download and install Windows Updates Certain hardware or software may have problems with Windows 10, and since hardware and software issues can create such errors, it is extremely important that you update Windows 10 as often as you can.

In addition to many bug fixes, these updates improve stability, security, and new features.

Solution 2 – Update your drivers

Another common cause of BSoD errors may be its drivers. Drivers allow Windows 10 to recognize and use certain hardware, and if a particular driver is outdated or not compatible with Windows 10, you will most likely get an INITIALIZATION SETTING FAILED error.

To make sure your system is stable and free of BSoD errors, be sure to update your drivers frequently. To update a certain driver, simply visit the website of your hardware manufacturer and download the latest drivers for your device.

Alternatively, you can download all the necessary drivers using Device Manager. To do that, follow these steps:

  1. press Windows Key + X to open the Advanced User Menu and select Device administrator of the list.
    device administrator
  2. When Device Manager opens, locate the driver you want to update, right-click and choose Update driver software.
  3. Select Automatically check for updated driver software. By choosing this option Windows 10 will automatically search and download the best driver for your device.

Some users claim that using Device Manager to update their drivers is not as effective as downloading them directly from the manufacturer's website. Device Manager sometimes will not be able to download the latest drivers, so if you want to have the latest drivers, you may need to find and download them manually.

Update drivers automatically

Searching for drivers on your own can be time consuming. Therefore, we recommend that you use a tool that does this automatically. Using an automatic driver updater will save you the trouble of manually searching for drivers, and will always keep your system updated with the latest drivers.

Tweakbit Driver Updater (approved by Microsoft and Norton Antivirus) will help you update drivers automatically and prevent damage to your PC caused by installing wrong driver versions. After several tests, our team concluded that this is the best automated solution.

Here is a quick guide on how to use it:

  1. Download and install TweakBit Driver Updatercontroller updater start window
  2. Once installed, the program will start scanning your PC for outdated drivers automatically. Driver Updater will check the versions of your drivers installed in its cloud database for the latest versions and recommend the appropriate updates. All you need to do is wait for the scan to complete.
    Tweakbit Driver Updater scanning process
  3. At the end of the scan, you will get a report on all the problem drivers found on your PC. Review the list and see if you want to update each controller individually or all at once. To update one controller at a time, click the Update Controller link next to the controller name. Or simply click the Update All button at the bottom to automatically install all recommended updates.
    Full automatic update
    Note: Some drivers have to be installed in several steps, so you will have to press the "Update" button several times until all their components are installed.

Solution 3 – Run the BSOD troubleshooter

Now, let's move on to the troubleshooting tools. The first problem solver that we are going to try is Windows The 10 built-in BSOD troubleshooter Hopefully this tool can also deal with the CONFIG INICIALIZATION FAILED error.

Here is how to run Windows The 10 Integrated Troubleshooting Tool:

  1. Go to the Configuration app.
  2. Go to the Update and security section and select Solve problems from the menu on the left.
  3. Select BSOD from the right pane and click Run the troubleshooter.BSoD Troubleshooting
  4. Follow further on-screen instructions to complete the process.

Solution 4 – Run the SFC scan

Another troubleshooting tool that we are going to try here is SFC scanning. System File Checker is a command line tool that basically scans through your system for possible problems. If a damaged system file is a problem, this tool will automatically repair it and the problem will be resolved.

Here's how to run the SFC scan on Windows 10:

  1. Go to Search, type cmd and open command prompt as administrator.
  2. Enter the following line and press Enter: sfc / scannowCOMPLETE FIX: Error INITIALIZING THE CONFIGURATION Windows 10 6
  3. Wait until the process ends (it is longer).
  4. If the tool finds a corrupt system file, it will automatically repair it.
  5. Now, close the command prompt and restart your computer.

Solution 5 – Run DISM

And the third troubleshooter that we are going to test here is DISM. This tool redeploys the system image and solves potential problems along the way. Therefore, running DISM may also resolve the CONFIG INICIALIZATION FAILED error.

We will guide you through the standard and procedure using the installation media below:

  1. Right-click Start and open Command Prompt (Administrator).
  2. Paste the following command and press Enter:
      • DISM / Online / Cleaning Image / RestoreHealthCOMPLETE FIX: Error INITIALIZING THE CONFIGURATION Windows 10 7
  3. Wait until the scan completes.
  4. Restart your computer and try updating again.
  • With the Windows installation media
  1. Insert your Windows installation media
  2. Right-click on the Start menu and choose Command Prompt (Administrator) from the menu.
  3. On the command line, type the following commands and press Enter after each:
    • dism / online / cleanup-image / scanhealth
    • dism / online / cleanup-image / restorehealth
  4. Now type the following command and press Enter:
    • DISM / Online / Cleanup-Image / RestoreHealth /source:WIM:X:SourcesInstall.wim:1 / Limited Access
  5. Be sure to change a X value with the drive letter mounted with Windows 10 installation.
  6. After the procedure is complete, restart your computer.

Solution 6 – Check the hard drive

A broken hard drive is alarming. And the first warning messages come in the form of BSOD problems. So go and check the current status of your hard drive. To do that, you must run the chkdsk command. This command will scan your partitions and apply solutions, if possible.

Here's how to run the chkdsk command in Windows 10:

  1. Enter the Advanced start (Restart your computer while holding down the Shift key.)
  2. Choose Troubleshoot> Advanced Options.
  3. Select Symbol of the system from the list of options.
  4. When the command prompt appears, enter the following lines and press Enter after each line to run it:
    • bootrec.exe / rebuildbcdCOMPLETE FIX: Error INITIALIZING THE CONFIGURATION Windows 10 8
    • bootrec.exe / fixmbr
    • bootrec.exe / fixboot
  5. Some users also suggest that you need to run more chkdsk commands too. To run these commands, you must know the drive letters for all partitions on the hard drive. At the command prompt, you must enter the following (but remember to use the letters that match the partitions on your hard drive on your PC):
    • chkdsk / r c:COMPLETE FIX: Error INITIALIZING THE CONFIGURATION Windows 10 9
    • Chkdsk / r d:

    This is just our example, so keep in mind that you need to run the chkdsk command for every partition on your hard drive you have.

  6. Restart your computer and check if the problem is solved.

Solution 7 – Turn off caching on your motherboard

Few users reported that disabling caching on motherboard fixed SETUP FAILED error You can disable caching from BIOS, but for detailed instructions on how to do this make sure to check your motherboard manual base.

Solution 8 – Update the firmware of your SSD

If you are using an SSD, be sure to update your firmware. Few users reported that they managed to fix the problem by updating their SSD firmware, so you can try it. It's worth mentioning that updating your firmware can remove all files from that SSD, so keep this in mind.

Updating the SSD firmware is an advanced procedure, and if you don't do it carefully, it can cause permanent damage to your SSD, so please be very careful when updating the firmware.

Solution 9 – Check for problematic software

Sometimes some software may cause the CONFIGURE INITIALIZATION FAILURE BSoD error to appear. Almost any installed software can cause this error, and if you installed any new software recently, be sure to remove it.

A common cause of BSoD errors may be your antivirus software, therefore you may want to remove it to correct this error. It is worth mentioning that almost any antivirus program can cause this error, so be sure to remove any antivirus tools you have installed.

To completely remove certain antivirus, we recommend using a dedicated uninstaller. Many security companies offer removal tools for their software, so be sure to download one for your antivirus program.

If removing the antivirus solved the problem, you can now download the latest version of the same tool, or you can switch to a different antivirus software. If you are looking for an alternative, we write about the best antivirus programs for Windows 10, so be sure to check them out.

If you can't access Windows 10 Due to a FAILED INITIALIZATION SETUP error, you can try to remove the problematic apps from Safe Mode. To access safe mode, do the following:

  1. Restart your computer several times as it starts to start Automatic Repair.
  2. Choose Troubleshoot> Advanced Options> Startup Settings. Click on the Restart button.
  3. When your computer restarts again, you will see a list of options. Select Safe mode with network functions.

When you enter safe mode, try to find and remove the problematic application that is causing the BSoD error. Please note that if your computer runs smoothly in Safe Mode, the BSoD error is probably caused by certain application or driver, so you need to find and remove it.

Solution 10: check for problematic hardware

BSoD errors, such as FAILED INITIALIZATION SETUP, can be caused by new hardware, and if you recently installed any new hardware, be sure to remove or replace it. Sometimes certain hardware is not fully compatible with your PC and that may cause BSoD error.

In addition to new hardware, faulty hardware can also cause these kinds of errors. RAM is the common cause of such errors, so be sure to test your RAM with tools like MemTest86 +. Remember to keep testing your RAM for a couple of hours for a thorough analysis.

If your RAM is working properly, check other hardware like your motherboard, hard drive, graphics card and processor.

The CONFIGURATION INITIALIZED FAILED error can be troublesome, but hopefully you managed to fix it using one of our solutions.

Frequently Asked Questions: Read more about the CONFIGURATION INITIALIZATION FAILED error?


The CONFIG INICIALIZATION FAILED error is a BSoD error that can be caused by many factors including faulty hardware or damaged software and even malware or virus.


Here are some steps to follow if you want to correct the INITIALIZED FAILURE CONFIGURATION error: Update Windows 10 and its drivers, run the BSOD Troubleshooter, check the hard drive, disable caching on your motherboard, update the firmware of your SSD, check the problem software, check the problem hardware.

BSoD errors can be caused by hardware malfunctions, faulty drivers and problematic software, or even viruses or malware. Initially, a BSoD error indicates a problem with one of the hardware components.

From the editor Note: This post was originally published in October 2018 and has since been renewed and updated in April 2020 to provide freshness, precision and comprehensiveness.

escort malatya escort bursa escort antalya escort konya mersin escort